Guidelines on how to go about Replacing your Fence in Person
Sometimes, your fence may be in a dilapidated situation. You may not notice some fine details and you end up disappointed when the fence is down. The details of the fence can be the reason for the deterioration of the fence. You need to consider the following when replacing your fence.
You should be familiar with the local laws relating to zoning. There are certain structures which cannot be built without approval from the authorities. It doesn’t matter whether you will be using the same materials and putting them on the same spots as they previously were. You may end up getting fined for doing a construction without the permits and legal documents. The new fence needs to meet the set guidelines for it to stand. The new fence may end up being destroyed for not meeting the required standards, and you may even be fined for the same. Even if you are intending to reestablish the fence on the same position as the old one, you should be able to see your utility provider. This will help you to identify the points where lines pass through, so that you don’t interfere with them during the construction.
Another thing you ought to consider is the materials you intend to use. The length of time that you want your fence to last should be in your mind first before going for the materials. Your budget also needs to be considered before you go out to buy the building materials. You need to buy wood of higher grade so that the fence can last a lot longer. Obviously, you will spend more to get this type of wood, but if the money is enough, you can decide to replace the wood with the aluminum vinyl. All the remains of the old fence must be removed from the site so that you can get the space to dig deeper for the posts. The materials required in the building of a sturdy fence ought to be very strong. And the foundation has to be firm as well.
You should then map out the entire fence layout so that you don’t get out of the position of the old fence. The position of the posts and the corner points must be identified as well. You can use strings and batters to do the markings. Shovels and digging bars can then be used to dig the holes at the marked points. Power augers can be used to dig the holes if the compound is huge because you may end up spending a lot of energy and time to accomplish the digging. When the holes are deep enough, you can set the posts in them and the rails should follow.